APPA-203

APPA-203

．2000 count large scale digital display
．Autoranging and Manual selection
．Backlight
．0.5% DCV accuracy
．20M Ohms Resistance capability
．True RMS reading on AC mode
．AC/DC Dual Power Sources
．Data Hold
．Min/Max function
．Capacitance measurement
．Frequency Counter
．Diode and Continuity Test
．6KV transients protection on 660 VAC feeders
．Test lead storage compartment
．Side & neck strap design for handle carrying
．Power Line 110V, 220V Selectable
．CAT III 300V/CAT II 600V standard

APPA 200 Series (958 KB)

Compare

Description

	APPA 201N	APPA 208	APPA 208B
Digital display	2000 count	4000/40000 count	4000/40000 count
Analog Bar graph Segments	N/A	43	43
Autoranging and Manual selection	v	v	v
AC+DC True RMS	AC only	v	v
Auto Calibration	N/A	v	v
Backlit	v	v	v
Automatic AC/DC voltage detector with low impedance(Auto-V LoZ)	N/A	v	v
High Frequency Rejection (HFR)	N/A	v	v
Peak Hold	N/A	v	v
Auto Hold	v	v	v
MIN/MAX	v	v	v
Relative Mode	N/A	v	v
Duty Cycle	N/A	v	v
Memory Store/Recall	N/A	1000	1000
dBm/dB reading	N/A	v	v
Data Logging Capacity	N/A	40,000	40,000
Optical interface	N/A	v	v
Bluetooth	N/A	N/A	v
Auto fuse detection	N/A	v	v
Beep Guard	N/A	v	v
Low Battery Indication	v	v	v

SPECIFICATIONS:(All at 23°C±5°C, ≦ 80% R.H.)

		APPA 201N	APPA 208	APPA 208B
DCV：	Ranges	200mV to 600V	40mV to 1000V	40mV to 1000V
	Resolution	100uV	1uV	1uV
	Basic Accuracy	±(0.5%+2d)	±(0.03%+10d)	±(0.03%+10d)
ACV：	Ranges	200mV to 600V	40mV to 1000V	40mV to 1000V
	Resolution	100uV	1uV	1uV
	Basic Accuracy	±(1.5%+5d)	±(0.5%+20d)	±(0.5%+20d)
	Bandwidth	50Hz to 500Hz	40Hz to 100kHz	40Hz to 100kHz
(AC+DC)V：	Ranges & Resolution：Same as ACV, except Accuracy	N/A	v	v
Auto V-LoZ	Range: 400.0V, 1000V	N/A	v	v
DCA：	Ranges	200uA to 10A	40mA to 10A	40mA to 10A
	Resolution	0.1uA	1uA	1uA
	Basic Accuracy	±(1.0%+2d)	±(0.2%+10d)	±(0.2%+10d)
ACA：	Ranges	200uA to 10A	40mA to 10A	40mA to 10A
	Resolution	0.1uA	1uA	1uA
	Basic Accuracy	±(1.5%+5d)	±(0.8%+20d)	±(0.8%+20d)
	Bandwidth	50Hz to 500Hz	40Hz to 10KHz	40Hz to 10KHz
(AC+DC)A：	Ranges & Resolution：Same as ACA, except Accuracy	N/A	v	v
OHM：	Ranges	200Ω to 20MΩ	400Ω to 40MΩ	400Ω to 40MΩ
	Resolution	0.1Ω	0.01Ω	0.01Ω
	Basic Accuracy	±(0.7%+3d)	±(0.2%+10d)	±(0.2%+10d)
Continuity：	2kHz Tone Buzzer	<50Ω	10Ω~50Ω(Adj)	10Ω~50Ω(Adj)
Diode Test:	Open Circuit Voltage	±3V	±2.5V	±2.5V
Frequency Counter：	Ranges	2000Hz to 20MHz	40Hz to 4MHz	40Hz to 4MHz
	Resolution	1Hz	0.001Hz	0.001Hz
	Basic Accuracy	±(0.01%+2d)	±5d	±5d
Duty Factor：	Ranges	N/A	5% to 95%	5% to 95%
	Resolution	N/A	0.1%	0.1%
	Basic Accuracy：5Hz to 10kHz, 5Vp-p	N/A	±3d	±3d
Capacitance：	Ranges	2nF to 2mF	40nF to 40mF	40nF to 40mF
	Resolution	1pF	10pF	10pF
	Basic Accuracy	±(1.9%+8d)	±(0.9%+2d)	±(0.9%+2d)
℃ / ℉	Ranges	N/A	-200℃ to 1200℃	-200℃ to 1200℃
	Resolution：	N/A	0.1℃	0.1℃
	Basic Accuracy：	N/A	±(1%+10d) for ℃	±(1%+10d) for ℃

GENERAL:

	APPA 201N	APPA 208	APPA 208B
Analog bargraph display：	N/A	v	v
Measuring Rate:	1.5 times/sec	10 times/sec	10 times/sec
Over range Indication :	OL	OL	OL
Auto Power Off :	10 minutes	1~30 minutes(Adj)	1~30 minutes(Adj)
Operating Temperature : 0℃~50℃, ≦80%RH	v	v	v
Storage Temperature : -20℃~60℃	v	v	v
Temperature Coefficient : 0.1 x (Spec.Acc)/℃, <18℃ or >28℃	v	v	v
Safety : IEC 1010-1	CAT III 300V, CAT II 600V	CAT III 600V, CAT II 1000V	CAT III 600V, CAT II 1000V
EMC: EN61326-1	N/A	v	v
Power Requirement：AC 100~ 240V, 50/60Hz, 10VA	v	v	v
DC AA or LR6 or AM3 battery 1.5V x 6	v	v	v
Battery Life：In hours without backlight (Alkaline battery)	1200	50	50
Size： without carrying case (mm)	218(W) x 195(L) x 73(H)	230(W) x 233(L) x 95(H)	230(W) x 233(L) x 95(H)
Weight：without power cord	1.3Kg	1.6Kg	1.6Kg
Accessories：Test Leads, carrying strap, power cord and manual	v	(also including Temp. probe, USB cable and APPA WinDMM 208 software)	(also including Temp. probe, USB cable and APPA WinDMM 208 software)